Operation; Safety Instructions - Siemens SIMOTICS S-1FG1 Operating Instructions Manual

Operation

9.1

Safety instructions

Injuries caused by motion of the servo geared motor and loose objects
Machine movement and loose objects, which can fall or be flung out, can cause severe injury
or result in fatal injuries.
• Ensure that the servo geared motor has been completely installed and all of the setting work
• Ensure that nobody is at risk before switching on the machine.
• Before switching on, check that there are no loose objects in or on the servo geared motor
• Before switching on, carefully check that all safety guard covers are installed and all safety
NOTICE
Thermal damage to temperature-sensitive parts
Some parts of the electric motor enclosure can reach temperatures exceeding 100 °C. If
temperature-sensitive parts, e.g. electric cables or electronic components, come into contact
with hot surfaces, these parts could be damaged.
• Ensure that temperature-sensitive parts do not come into contact with hot surfaces.
NOTICE
Damage when the maximum speed is exceeded
Maximum speed n
stamped on the rating plate (nameplate).
Impermissible speeds can damage the gearbox of the servo geared motor.
• Ensure that the maximum permissible operating speed is not exceeded. Implement this
NOTICE
Damage when the maximum torque is exceeded
Maximum torque M
on the rating plate (nameplate).
Impermissible torques can result in gearbox damage.
• Configure the control so that the maximum torque is not exceeded.
SIMOTICS S-1FG1 servo geared motor
Operating Instructions, 12/2022, A5E47360747B/RS-AC
WARNING
completed.
that could fall off or be flung off.
equipment functions correctly.
is the highest permissible operating speed. The maximum speed is
1max
using a suitable closed-loop control or activate the speed monitoring function in the drive.
is the maximum permissible torque. The maximum torque is specified
2max
9
155