Important Product Information; Proper And Intended Use/Foreseeable Misuse; Electromagnetic Compatibility - Siemens SIMOTICS DP 1PC1423 Operating Instructions Manual

Low-voltage motors, roller-table motors sh 112... 400

Table of Contents

Introduction

1.5 Important product information

1.5

Important product information

1.5.1

Intended use of the machines

These machines are intended for industrial installations. They comply with the harmonized

standards of the series EN / IEC 60034 (VDE 0530). It is prohibited to use these motors in

hazardous zones if the marking on the motor rating plate does not explicitly permit line or

converter operation. If other/more wide-ranging demands (e.g. protection so that they cannot

be touched by children) are made in special cases – i.e. use in non-industrial installations – these

conditions must be ensured by the customer.

Note

Machine directive

Low-voltage motors are components designed for installation in machines in accordance with

the current Machinery Directive. Commissioning is prohibited until it has been absolutely

identified that the end product is in conformance with this Directive. Comply with standard EN /

IEC 60204-1.

Risk of explosion

This machine is not designed for use in hazardous areas. An explosion can occur if the machine

is operated in these areas. This can result in death, serious injury or material damage.

• Never operate this machine in hazardous areas.

1.5.1.1

This machine is designed in accordance with IEC/EN 60034, and when used as specified it

satisfies the requirements of European Directive 2014/30/EU on Electromagnetic Compatibility.

WARNING

1PC1423 roller-table motors SH 112 ... 400

Operating Instructions

Table of Contents