Siemens SIMOTICS S-1FG1 Operating Instructions Manual page 31

European EMC Directive
SIMOTICS motors do not fall within the scope covered by the EMC Directive. The products
are not considered as devices in the sense of the directive. Installed and operated with
a converter, the motor - together with the Power Drive System - must comply with the
requirements laid down in the applicable EMC Directive.
European RoHS Directive
The SIMOTICS motor series complies with the Directive 2011/65/EU regarding limiting the use
of certain hazardous substances.
European Directive on Waste Electrical and Electronic Equipment (WEEE)
SIMOTICS motors comply with the 2012/19/EU directive on taking back and recycling waste
electrical and electronic equipment.
European Directive 2005/32/EC defining requirements for environmentally friendly
design of electric motors
The SIMOTICS motor series is not subject to Regulation (EC) No. 640/2009 for
implementation of this directive.
European Directive 2009/125/EC defining ecodesign requirements of electric motors
and speed controls
The SIMOTICS motor series is not subject to (EU) Regulation 2019/1781 for implementation
of this directive.
Eurasian conformity
SIMOTICS motors comply with the requirements of the Russia/Belarus/Kazakhstan (EAC)
customs union.
China Compulsory Certification
SIMOTICS motors do not fall within the scope covered by the China Compulsory Certification
(CCC).
CCC negative certification (https://support.industry.siemens.com/cs/de/de/view/109769143)
Underwriters Laboratories
SIMOTICS motors are generally in compliance with UL and cUL as components of motor
applications, and are appropriately listed.
Specifically developed motors and functions are the exceptions in this case. Here, it is crucial
that you carefully observe the content of the quotation and that there is a UL or cUL mark on
the rating plate!
Quality systems
Siemens employs a quality management system that meets the requirements of ISO 9001
and ISO 14001.
Certificates for SIMOTICS motors can be downloaded from the Internet at the following link:
Certificates for SIMOTICS motors
cert)
SIMOTICS S-1FG1 servo geared motor
Operating Instructions, 12/2022, A5E47360747B/RS-AC
3.1 Technical features and ambient conditions
(https://support.industry.siemens.com/cs/ww/de/ps/13347/
Description
29