Training; Important Product Information; Intended Use - Siemens SIMOTICS T-1FW6 Operating Instructions Manual

Introduction
1.5 Important product information
1.4.6

Training

Description
SITRAIN – Digital Industry Academy offers a comprehensive range of training courses on
Siemens industrial products – directly from the manufacturer, for all industries and use cases, for
all knowledge levels from beginner to expert.
More information can be found on the Internet via the following address
www.siemens.com/sitrain).
1.5

Important product information

1.5.1

Intended use

Risk of death and material damage as a result of incorrect use
There is a risk of death, serious injury and/or material damage when direct drives or their
components are used for a purpose for which they were not intended.
• Only use the motors for industrial or commercial plants and systems.
• Do not install the motors in hazardous zones if the motors have not been expressly and
• Only use direct drives and their components for applications that Siemens has explicitly
• Protect the motors against dirt and contact with corrosive substances.
• Ensure that the installation conditions comply with the rating plate specifications and the
• Contact your local sales partner if you have any questions relating to proper and intended
• If you wish to use special versions and design versions whose technical details vary from the
14
WARNING
explicitly designed and authorized for this purpose. Carefully observe any special additional
notes provided.
specified.
condition specifications contained in this documentation. Where relevant, take into
account deviations regarding approvals or country-specific regulations.
use.
motors described in this document, then you must contact your local sales partner.
(https://
1FW6 built-in torque motors
Operating Instructions, 09/2022, A5E52220812B AA