Connecting-Up A Converter; Selecting And Connecting The Cables - Siemens SIMOTICS S-1FG1 Operating Instructions Manual

Pin assignment, 12-pin sig‐
nal connector M23
7.4.4

Connecting-up a converter

7.4.4.1

Selecting and connecting the cables

• To connect the motor to a converter, use MOTION-CONNECT cables or shielded connecting
cables.
Note
The cable shielding should be braided and must have a high electrical conductivity. Braided
shields made of copper or aluminum are well suited.
SIMOTICS S-1FG1 servo geared motor
Operating Instructions, 12/2022, A5E47360747B/RS-AC
Pin assignment, 17-pin signal connector M23
16 = P sensor
17 = not connected
16 = P sensor
17 = not connected
Connecting
7.4 System integration
Pin assignment, 9-pin signal
connector M23
137