Important Product Information; Proper And Intended Use / Foreseeable Incorrect Use - Siemens SIMOTICS S-1FT2 Operating Instructions Manual

Introduction
1.4 Important product information
1.4

Important product information

1.4.1

Proper and intended use / foreseeable incorrect use

Danger to life and material damage when incorrectly used
If you do not use the motors or their components correctly, there is a risk of death, severe injury
and/or material damage.
• Only use the motors for industrial or commercial plants and systems.
• If, in an exceptional case, you do not use the motors in industrial or commercial plants and
• Do not use the motors in hazardous areas (where there is a risk of explosion), if the motors
• Only use the motors and their components for the applications specified by Siemens.
• Protect the motors against dirt and contact with aggressive substances.
• Ensure that the site conditions comply with the rating plate data and the conditions
• If you have any questions regarding the intended use, please contact your local sales
• If you wish to use special versions and design variants, whose technical data differ from the
Danger to life for wearers of active implants due to magnetic and electrical fields
Electric motors pose a danger to people with active medical implants, e.g. cardiac stimulators,
who come close to the motors.
• If you are affected, stay a minimum distance of 300 mm from the motors (tripping threshold
Description of the proper and intended use
The motor is intended for industrial or commercial plants.
The motor is designed for operation in sheltered areas under normal climatic conditions,
such as those found on shop floors.
Operating the motor in a hazardous zone is prohibited.
12
WARNING
systems, ensure that increased requirements are complied with (e.g. regarding touch
protection).
have not been expressly released and authorized for these types of applications. Comply
with the separately added supplementary notes.
specified in this documentation. Take into consideration deviations regarding approvals or
country-specific regulations.
partner.
motors described in this document, then first contact your local sales partner.
WARNING
for static magnetic fields of 0.5 mT according to the Directive 2013/35/EU).
SIMOTICS S-1FT2 synchronous motors for SINAMICS S120
Operating Instructions, 12/2023, A5E50610821B AF