Target Group; Avoiding Dangers; Standard Scope - Siemens SIMOTICS S-1FG1 Operating Instructions Manual

Introduction
1.2 About this manual
Notes
Notes are shown as follows:
Note
A Note is an important item of information about the product, handling of the product or the
relevant section of the document. Notes provide you with help or further suggestions/ideas.
1.2.3

Target group

Description
These operating instructions are intended for:
• Fitters
• Commissioning engineers
• Machine operators
• Service and maintenance personnel
• Warehouse personnel
• Personnel decommissioning the motor
• Personnel disposing of the motor
1.2.4

Avoiding dangers

Description
Avoid dangers. Ensure safe, problem-free operation and a maximum service life:
• Before you start using the motor, you must read these Operating Instructions.
• Always follow the safety instructions and notices in these operating instructions.
The warning notice system is explained at the beginning of this document.
1.2.5

Standard scope

Description
This documentation describes the functionality of the standard scope. This scope may differ
from the scope of the functionality of the system that is actually supplied. Please refer to the
ordering documentation only for the functionality of the supplied drive system.
10
SIMOTICS S-1FG1 servo geared motor
Operating Instructions, 12/2022, A5E47360747B/RS-AC