Initializing A Macro; Renaming A Macro - Roland VR-6HD Reference Manual

Initializing a Macro

You can initialize a macro and completely erase its settings.
Ó
1 .
[MENU] button "MEMORY/MACRO/SEQ"
"MACRO", and press the [VALUE] knob.
The macro screen appears.
2 .
Long-press the area of the macro number you want to
initialize.
Switch between pages
Long-press
A popup menu appears.
3 .
Touch <INITIALIZE>.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
4 .
Use the [VALUE] knob to select "OK", and then press the
[VALUE] knob.
The macros are initialized.
MEMO
About the macro demo data
Once you perform a factory reset (p. 94), any demo data you have
edited or deleted is restored to its factory settings.

Renaming a Macro

Here's how to rename a macro.
Ó
1 .
select [MENU] button
"MACRO", and press the [VALUE] knob.
The macro screen appears.
2 .
Long-press the area of the macro number you want to
rename.
A popup menu appears.
3 .
Touch <NAME EDIT>.
This brings up the software keyboard for input.
4 .
Input the macro name.
* You can input up to 8 characters.
5 .
Touch <Enter> in software keyboard.
This changes the macro's name.
Ó
"MEMORY/MACRO/SEQ"
Switch between pages
Long-press
Other Functions
Ó
select
73