Changing The Thumbnail Position; Saving Scene Memories To A Usb Flash Drive - Roland VR-6HD Reference Manual

Changing the Thumbnail Position

You can change the position of the thumbnail used for checking the
video/image content, shown on the scene memory setup screen.
Ó
1 .
[MENU] button "MEMORY/MACRO/SEQ"
Ó
MEMORY" select "8VIEW", and press the [VALUE] knob.
The scene memory screen appears.
2 .
Long-press the area of the scene memory whose thumbnail
you want to change.
A popup menu appears.
3 .
Touch <THUMBNAIL>.
This shows the thumbnail layout screen.
4 .
Touch the screen to access the settings.
5 .
Press the [EXIT] button.

Saving Scene Memories to a USB Flash Drive

You can save the scene memories (1–32) as a single file (.VR6SCENE)
to a storage media (SD card or USB flash drive) that's connected to the
VR-6HD. This lets you access saved scene memory files on the storage
Ó
media and load them to use as needed.
"SCENE
NOTE
¹ When using a SD card or USB flash drive for the first time, you
¹ Never turn off the power or remove the SD card or USB flash drive
¹ Depending on the SD card or USB flash drive, it may take some
¹ The scene memory file is saved to the "Roland/VR-6HD/scene_
Saving a new file
1 .
Insert the SD card into the SDXC card slot.
* When using a USB flash drive, connect the USB flash drive to the USB
HOST port.
2 .
[MENU] button
MEMORY", and press the [VALUE] knob.
The scene memory screen appears.
3 .
Touch <SETUP>.
The setup screen appears.
4 .
Use the [VALUE] knob to select "SAVE TO STORAGE", and
then press the [VALUE] knob.
This shows a list of scene memory files on the storage media.
* You can use "TARGET STORAGE" onscreen to switch between the
storage media used for export.
5 .
Select "
This brings up the software keyboard for input.
must format it using the VR-6HD (p. 13).
while the message "PROCESSING... " is shown.
time to be recognized.
memory" folder.
Ó
"MEMORY/MACRO/SEQ"
" and press the [VALUE] knob.
FILE NAME
Other Functions
Ó
select "SCENE
67