Äsplitting The Video; Configuring The Screen Layout; Displaying The Split - Roland VR-6HD Reference Manual

Splitting the Video
Here's how to composite two videos in dividing the screen into left/right or upper/lower.
Positioning a video
Left or upper: Video on the PGM bus
Right or lower: Video on the PST bus

Configuring the Screen Layout

You can configure the screen layout as a split screen.
1 .
While the [SPLIT] button is lit, select "SPLIT" from the
Ó
[MENU] button "TRANSITION", and press the [VALUE]
knob.
The setup screen appears.
2 .
Touch the screen to access the settings.
Value Explanation
SPLIT V
This vertically crops the center section of the video
(split left/right).
A
TYPE
SPLIT H
A
A
This horizontally crops the center section of the
video (split upper/lower).
A
Selects the video source to display on the left or
PGM SOURCE
upper side.
Selects the video source to display on the right or
PST SOURCE
lower side.
Adjusts the position of the video that is shown in the
PGM-CENTER
left or upper side.
Adjusts the position of the video that is shown in the
PST-CENTER
right or lower side.
CENTER POS Adjusts the position of the boundary.
BORDER
Specifies the color of the border.
COLOR
BORDER
Adjusts the width of the border.
WIDTH
* For details on the parameter, refer to "3: TRANSITION" (p. 122).
Split left/right
Split upper/lower
B A B
A
B A B
B
B
A
B
B
MEMO
When the split setup screen is shown, you can edit the
parameters such as CENTER POS, PGM-CENTER and PST-CENTER
by directly dragging on the screen.
3 .
Press the [MENU] button to close the screen.

Displaying the Split

1 .
Press the [SPLIT] button to turn on split compositing (the
button lights up).
The SPLIT button lights up red.
2 .
Press a VIDEO SWITCHER [1]–[6] button to select the video
you want to display upper or on the left.
The video on the PGM side is selected when the SPLIT button is lit up
red.
MEMO
You can also directly touch the MULTI-VIEW or STILL-VIEW screens
to select a video signal.
3 .
Press the [SPLIT] button again.
The SPLIT button lights up green.
* The button's lit color switches between red and green each time you
press the SPLIT button.
4 .
Press a VIDEO SWITCHER [1]–[6] button to select the video
you want to display lower or on the right.
The video on the PST side is selected when the SPLIT button is lit up
green.
MEMO
You can also directly touch the MULTI-VIEW or STILL-VIEW screens
to select a video signal.
5 .
To turn off the split, press the [MIX] or [WIPE] button.
Video Operations
21