Recalling A Scene Memory; Initializing A Scene Memory; Renaming A Scene Memory - Roland VR-6HD Reference Manual

Other Functions

Recalling a Scene Memory

Only for scene memories 1–6
1 .
Press the [SCENE MEMORY] button.
2 .
Press the VIDEO SWITCHER button for the number whose
setting you want to recall.
The scene memory settings are recalled.
Scene memory 1–32
Ó
1 .
[MENU] button "MEMORY/MACRO/SEQ"
MEMORY", and press the [VALUE] knob.
2 .
Touch <SETUP>.
The Scene Memory setup screen appears.
3 .
Touch the area of the scene memory number whose settings
you wish to recall.
The scene memory settings are recalled.
MEMO
¹ You can choose not to recall a certain setting when recalling a
scene memory.
Select "LOAD PARAMETER" from the [MENU] button
Ó
MACRO/SEQ" "SCENE MEMORY"
whether the settings are recalled per parameter for LOAD
PARAMETER.
¹ You can apply video transition effects, make an inset screen fade in
and so on when you recall a scene memory.
Set the following menu items from the [MENU] button
Ó
"MEMORY/MACRO/SEQ"
Menu item Explanation
Sets how long the transition to the next video
FADE TIME takes when recalling a scene memory.
* The time you set is used for the parameters below.
When this is "ON", the transition effect is applied
MIX/WIPE
when the scene memory is recalled.
When this is "ON", the inset screen fades in when
PinP & KEY
you recall a scene memory that includes a PinP
1–2
composite.
When this is "ON", the superimposed caption and
DSK video fades in when you recall a scene memory
that includes a DSK composite.
66
Ó
select "SCENE
Ó
"MEMORY/
Ó
"SETUP", and configure
Ó
Ó
"SCENE MEMORY" "SETUP".

Initializing a Scene Memory

Here's how to initialize the contents of a scene memory and erase it.
Ó
1 .
[MENU] button "MEMORY/MACRO/SEQ"
MEMORY", and press the [VALUE] knob.
The scene memory screen appears.
2 .
Long-press the area of the scene memory that you want to
initialize.
A popup menu appears.
3 .
Touch <INITIALIZE>.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
4 .
Select "OK" and press the [VALUE] knob.
The scene memory is initialized.

Renaming a Scene Memory

Here's how to rename a preset memory.
Ó
1 .
[MENU] button "MEMORY/MACRO/SEQ"
MEMORY", and press the [VALUE] knob.
The scene memory screen appears.
2 .
Long-press the area of the scene memory whose name you
want to change.
A popup menu appears.
3 .
Touch <NAME EDIT>.
This brings up the software keyboard for input.
4 .
Input the macro name.
* You can input up to 8 characters.
5 .
Touch <Enter> in software keyboard.
The name is changed.
Ó
select "SCENE
Ó
select "SCENE