Ide Adapter Sub-Menus; Boot Sequence Sub-Menu - RadiSys EPC-26A/27 Manual

EPC-26A/27 Hardware Reference
IDE Adapter 0 Master/Slave Sub-Menus:
These fields are headings for menus that allow you to enter complete disk
drive information. Once the information is entered for the drive, the entry in
the Main Menu shows the drive selected. For more information, turn to the
2 2
section concerning the IDE Adapter Menus.

Boot Sequence Sub-Menu

The Boot Sequence Sub-Menu allows you to change the boot delay, boot
sequence, and disable several displays during the boot process, such as the
SETUP prompt, POST errors, floppy drive check, and summary screen. Once
you have set the boot sequence, your choice displays in this entry in the Main
menu. For more information, turn to the section concerning the Boot
Sequence Sub-Menu.
Keyboard Features (Numlock) Sub-Menu
Use this menu to enable or disable various keyboard features, including
enabling the Numlock key, enabling the key click, and setting the keyboard
auto-repeat rate and delay. The Numlock setting displays for this entry in the
Main Menu. For more information, turn to the section concerning the
Keyboard Features Sub-Menu.
There are two more lines on the Main BIOS Setup Screen: "System Memory"
and "Extended Memory." These are display-only fields set by the BIOS. No
user interaction is required.

IDE Adapter Sub-Menus

There are two IDE adapter sub-menus: one for the master drive and one for
the slave drive. To use an EXM-HD or EXM-MX series mass storage unit, you
must configure a master adapter; the slave is optional, and not relevant to
most RadiSys hardware. To see the detailed characteristics of the device or
to change the device, choose the IDE Adapter 0 Master Sub-Menu to
configure the fixed disk. The following screen displays:
Page 6