Table of Contents
Advertisement
Appendix E: Formattig Flash and SRAM
Error Message
SLOT NUMBER OUT OF RANGE
Explanation
The EXM slot number listed does not contain a
flash/SRAM.
Resolution
Ensure that the EXM slot specified contains Flash/SRAM.
Error Message
SRAM FILE SYSTEMS ARE NOT BOOTABLE. DO
NOT SPECIFY THE /S OR /B PARAMETERS
Explanation
XFORMAT does not create bootable SRAM disks.
Resolution
Remove the /S, /N or /B flag.
SYSTEM DOES NOT CONTAIN ONBOARD FLASH
Error Message
Explanation
/T=O was specified for a system that does not contain
onboard flash (flash on the CPU card).
Resolution
Repeat the command without the /T=O option.
Error Message
TARGET SIZE NOT SPECIFIED
Explanation
The /F option is ill-formed.
Resolution
The syntax for the /F flag is /F<filename> <size>. The
filename is specified and is followed by the file size in
kilobytes.
Error Message
UNABLE TO INITIALIZE FLASH DEVICE
Explanation
XFORMAT has determined that no flash memory exists.
Resolution
Check that the system is properly connected to a +12V
power supply.
Error Message
UNABLE TO READ BOOT RECORD FILE
Explanation
The boot record files are not in the <srcdir> path.
Resolution
Copy the boot record files to the proper directory
Error Message
UNABLE TO READ SRAM DRIVE
Explanation
The SRAMDISK.SYS driver cannot read SRAM memory.
Resolution
Ensure the SRAM disk is formatted. The OB1 option byte
must be enabled via the EXM Setup Screen.
Error Message
UNRECOGNIZED FLAG
Explanation
A mis-spelled or illegal flag was used.
Resolution
Check the command line to ensure only legal flags are used.
E
Page E9
E
Advertisement
Table of Contents
