Table of Contents
Advertisement
E
Error Message
Explanation
Resolution
Error Message
Explanation
Resolution
Error Message
Explanation
Resolution
Error Message
E
Explanation
Resolution
Error Message
Explanation
Resolution
Error Message
Explanation
Resolution
Error Message
Explanation
Resolution
Page E8
EPC-27 Hardware Reference
INVALID TARGET SIZE SPECIFIED
An illegal character was detected in the file size portion of
the /F parameter.
Specify the file size using only hex characters.
MORE THAN ONE SOURCE PATH WAS SPECIFIED
Multiple source paths were detected on the command line.
Remove one of the source paths from XFORMAT's
invocation line.
NO ARGUMENTS SPECIFIED
The command line does not specify any operations.
Execute XFORMAT with /H to display flags and options.
NO SLOT SELECTED FOR THE EXM-2
XFORMAT requires specification of a slot when
formatting SRAM and EXM flash memory.
Rerun XFORMAT using the /P(osition) flag to indicate
which EXM slot to format.
NO SRAM MEMORY IN SPECIFIED SLOT
The /T=S option was selected, however, no SRAM memory
was detected on the card in the specified slot.
Ensure the /P(osition) flag is correct or that the /T(ype) flag
is specified correctly.
SOURCE PATHNAME TOO LONG
Insufficient storage for the pathname string.
Copy the files to a directory that is closer to the root.
SLOT <n> DOES NOT CONTAIN ENABLED
EXM-2
The slot number specified in the SRAMDISK.SYS
configuration line in CONFIG.SYS does not contain
enabled flash memory.
Enable the flash in the EXM Setup Screen, or verify that
the flash is listed in the correct slot.
Advertisement
Table of Contents
