Table of Contents
Advertisement
F
Refer to the README.TXT file on the floppy for additional information. Note that
you cannot use the NEWBIOS.EXE file on this Utilities diskette with any other
RadiSys EPC, and you can only use NEWBIOS.EXE shipped on this EPC's Utilities
diskette on this EPC.
Saving/Restoring CMOS Parameters
It is possible to use the NEWBIOS function to copy and restore CMOS parameters
into a 4K parameter block on the flash chip. This is useful if battery life becomes an
issue, or for backup.
To save your CMOS parameters into a partition block in the flash memory, type the
following:
NEWBIOS /S
To reverse the process and load the saved CMOS parameters in the flash memory
back into CMOS, type the following:
NEWBIOS /L
F
Page F4
EPC-27 Hardware Reference
Advertisement
Table of Contents
