FujiFilm FDR D-EVO II Operation Manual page 85

Chapter 4
4.1
This section describes the warning dialog box and error messages.
FUJIFILM Representative.
FUJIFILM Representative.
If a communication error or an unexpected error has occurred, a warning dialog box pops up on
the screen. In such a case, after checking error details and closing the box, take appropriate action
immediately. Be sure not to continue the operation of the image processing unit without taking an
appropriate action.
If any operation is performed while a warning dialog box is displayed, another screen may be
displayed, hiding the dialog box behind. In this case, press the [Enter] key to close the hidden box.
When a warning dialog box that contains an error code beginning with "10" appears, follow the
steps below.
1
2
3
4
The following message dialogue box appears not only when the image processing unit starts up but
When the problem is not solved within a short time after the message box is displayed, perform the
following procedure.
II
FDR D-EVO Operation Manual 897N120339A
4
4-1