FujiFilm FDR D-EVO II Operation Manual page 74

5
Press the OFF side of the main switch of the power supply unit.
Make sure that the power status LED is off.
6
3
If the control cabinet is included in the system, do not turn off the control cabinet with the main
switch. Shutdown operation may not be performed normally.
panel sensor is used in wired communication mode.
in wireless communication mode.
(When the DR-ID 1200DU is used)
1
Perform Steps
2
unit.
3
4
Make sure that the POWER lamp among the status lamps is off.
5
3-12
II
FDR D-EVO Operation Manual
Battery pack
CAUTIONS
CAUTIONS
1 2
1 and
897N120339A