FujiFilm FDR D-EVO II Operation Manual page 83

1
each device.
(When the DR-ID 1200PU is used)
unit using the SE cable.
Flat panel sensor
(When the DR-ID 1200DU is used)
into the docking stand, see "3.1.10 Attaching the
Flat Panel Sensor to the Docking Stand" on Page
3-8.
2
onto the image processing unit.
Power supply unit
progress, an error may occur.
If this happens, wait for a while and then try image
loading again.
3
4
5
with the exposure menu and then select
[Import].
HINT
When an image that has not been linked with an
exposure menu is left, if images are acquired from
is added to the image No. of the image that was
acquired previously.
For details, see the "Console Advance (DR-ID
300CL) Reference Guide".
FDR D-EVO
II
Operation Manual 897N120339A
3
3-21