FujiFilm FDR D-EVO II Operation Manual page 48

• The products in
However, the image processing unit cannot be installed while it is being charged.
• The FDR D-EVO
control cabinet DR-ID 1200MC and the image processing unit.
DR-ID 1211SE and DR-ID 1212SE, and the power supply unit DR-ID 1200MP.
• The panel unit DR-ID 1200PU can be operated in conjunction with the X-ray equipment, and it can
be used for exposures in wired mode.
DR-ID 1211SE and DR-ID 1212SE, and the docking stand DR-ID 1200DS.
• With the docking unit DR-ID 1200DU, the exposure ready status can be displayed with the lamp
2
with the lamp indication on the docking stand.
a commercially available personal computer conforming to IEC 60950-1 or equivalent.
panel sensors are used with three to four different techniques, two power supply units are required.
stand in wired communication mode. Up to three docking stand can be used.
• When the DR-ID 1200DU and a mobile X-ray unit are used, power to the access point is supplied by
connecting it to the image processing unit DR-ID 300CL.
*1 The software for the control cabinet is installed on the image processing unit (DR-ID 300CL).
the system. If not included, the software for the control cabinet can be installed on the image
processing unit (DR-ID 300CL).
Manual".
*3 When the image processing unit (DR-ID 300CL) is used in patient environment, run the notebook
computer on battery power.
2-2
II
FDR D-EVO Operation Manual
can be installed in patient environment.
II
consists of the panel unit DR-ID 1200PU or docking unit DR-ID 1200DU, the
897N120339A