FujiFilm FDR D-EVO II Operation Manual page 51

Name
Flat panel sensor
Flat panel sensor
Sleep lamp
Sleep release/memory
exposure mode start button
Memory exposure mode
start button
Battery pack Memory exposure mode status
level indicator In the memory exposure mode, the number of exposed images or an error during the start-up
of memory exposure mode is displayed.
Name
Status lamp
READY
POWER
ERROR
LINK
Power supply unit
(DR-ID 1200MP)
Main switch
Power status LED
HINT
the Flat Panel Sensor".
The DR-ID 1201SE and DR-ID 1202SE incorporate a GOS indirect panel.
The DR-ID 1211SE and DR-ID 1212SE incorporate a CsI indirect panel.
The color of this lamp is selected from among lime yellow, blue, purple, orange and
panel icon selected on the display of the image processing unit.
This LED shows the sleep status.
(Blue)
mode.
Extra sleep mode, which can further save power, can also be set. To specify or
change the setting of sleep mode or extra sleep mode, contact a FUJIFILM dealer.
Releases the extra sleep mode.
When this button is held pressed for 2 seconds while pressing the sleep release/
memory exposure mode start button, the memory exposure mode starts up.
The memory exposure mode can be started up when no exposure menu is
registered and calibration is not being performed.
Indicates the equipment status by LEDs.
READY (Green)
POWER (Blue)
(The power on/off state of the
ERROR (Orange)
LINK (White)
* When the battery pack is not attached, all LEDs are off.
unit.
Displays ON/OFF of the power supply unit.
Description
Off Sleep off or Sleep state
On Extra sleep state
Description
On Exposure possible
Blinks for 1.0
During exposure sequence
second
Off Not ready
On Power ON
Off Power OFF
Blinks for 1.0
Error occurred
second
Off Normal
On Connected
Off Communication not possible.
II
FDR D-EVO Operation Manual
2
2-5
897N120339A