FujiFilm FDR D-EVO II Operation Manual page 68

3.1.7
For details, refer to the manual of the personal computer.
Sensor
Do not remove the battery pack until a processed image appears in the window of the image processing unit after
the exposure.
3
1
Remove the battery cover.
then slide it in the direction of the arrow to remove
the battery cover.
2
Slide the battery pack along the dent of the battery
terminal. Align the guide mark of the battery pack
battery pack in to install it.
Make sure that battery pack is securely installed.
Pushing the battery pack in with the guide marks
misaligned may damage the connector terminal.
When attaching the battery pack, make sure that
the waterproof packing attached to the connector
sensor, the power is automatically turned on.
3-6
II
FDR D-EVO Operation Manual
Battery pack
897N120339A
Battery pack
• To remove the battery pack, perform the same
procedure as Step 1 (removing the battery cover).
• To install the battery cover, perform the same
procedure as Step 2 (installing the battery pack).
Guide marks Guide marks