FujiFilm FDR D-EVO II Operation Manual page 107

1 Image unevenness due to grid misalignment, X-ray beam misalignment, or shadow of clothes may
cause EDR image data analysis problems resulting in unstable density on the image.
2 If the target includes such materials as gypsum, denture, etc., stable density may not be obtained,
In such cases, use FIX MODE.
3 The EDR performs processing for the image area trimmed by the DR system.
then make an exposure.
4 Precautions when using AUTO MODE.
Auto mode
As this mode is available for extracting information on the skin, secure the positioning so
I
that the direct X-rays are incident to an area other than the target.
II No special precautions.
III Be sure to use a Ba contrast medium.
1 Be sure to secure the positioning so that the X-rays are incident to the area directly
outside the target.
IV
thickness of the target, as usual.
V
thickness of the target, as usual.
VI No special precautions.
VII No special precautions.
Precautions
II
FDR D-EVO Operation Manual
Z-3
897N120339A