FujiFilm FDR D-EVO II Operation Manual page 71

3.2
This section explains how to start up and shut down the system. Operations are required on the power
The image processing unit in this section is only an example. For details on the image processing unit being used,
see the Operation Manual provided with the personal computer.
(When the DR-ID 1200PU is used)
Make sure that the power cable is connected to the image processing unit.
1
2
Press the ON side of the main switch of the power supply unit.
Make sure that the power status LED is lit in blue.
3
CAUTIONS
or USB connector.
4
Press the ON side of the main switch of the power supply unit.
The initialization process starts.
• All cables should be connected properly.
• No media should be inserted into the disk drive of image processing unit.
If the control cabinet is included in the system, the control cabinet starts up automatically.
CAUTIONS
II
FDR D-EVO Operation Manual 897N120339A
3
3-9