FujiFilm FDR D-EVO II Operation Manual page 30

Table 4
The DR-ID 1200 is intended for use in the electromagnetic environment in which radiated RF disturbances are
controlled.
The customer or the user of the DR-ID 1200 can help prevent electromagnetic interference by maintaining a
minimum distance between portable and mobile RF communications equipment (transmitters) and the DR-ID 1200 as
recommended below, according to the maximum output power of the communications equipment.
1
Rated maximum output
power of transmitter
W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres
(m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output
power rating of the transmitter in watts (W) according to the transmitter manufacturer.
1-16
II
FDR D-EVO Operation Manual
Recommended separation distances between
150 kHz to 80 MHz
d = 1.2
0.12
0.38
1.2
3.8
12
897N120339A
m
80 MHz to 800 MHz
d = 1.2
0.12
0.38
1.2
3.8
12
800 MHz to 2.5 GHz
d = 2.3
0.23
0.73
2.3
7.3
23