Fault Reference Codes - Phocos Any-Grid Series User And Installation Manual

Fault Reference Codes

9.0
Fault Code Fault Event
01 Fan is locked while inverter is off
02 Over-temperature
03 Battery voltage is too high
04 Battery voltage is too low
05 AC output is short circuited
06 AC output voltage is too high
07 AC output overload timeout
08 Internal DC bus voltage is too high
09 Internal DC bus soft start failed
10 Solar charge controller over-current
11 Solar charge controller over-voltage
12 DC-DC converter over-current
13 Battery discharge over-current
51 Inverter over-current
52 Internal DC bus voltage is too low
www.phocos.com
Solar provides power to the AC output and charges
battery at the same time, no AC source available
Power to AC output from battery only
No battery connected and no AC source, power to AC
output from solar only
Screen View
46 | P a g e