Summary of Contents for Phocos Any-Grid PSW-H-5kW-230/48V
Page 1
Phocos Any-Grid™ series Any-Grid™ use with Lithium battery models: Arco Invincible III Applicable for Any-Grid™ PSW-H-5kW-230/48V, PSW-H-5kW-120/48V and PSW-H-6.5kW-120/48V Recommended battery settings guide...
Page 2
The Any-Grid must be installed according to the Any-Grid “User and Installation Manual” included with every Any- Grid unit and available online at www.phocos.com. The battery terminals of the Any-Grid must be connected to the batteries according to the Arco installation manual at the appropriate step mentioned in the chapter “5.0 Battery Settings and Communication Cable Installation”...
Page 3
Connect the battery communication cable mentioned in chapter 2 to the master battery’s RS-485-1 port and the other end to the Any-Grid’s BMS port. Take care to connect the correct cable ends to the battery and Any-Grid: www.phocos.com P a g e...
Page 4
Arco battery BMS. Automatically, the battery type of all other connected Any-Grid units will be set to “User-defined”, this is normal. The commissioning and programming of the battery-related settings of the Any-Grid is now complete. www.phocos.com P a g e...
Need help?
Do you have a question about the Any-Grid PSW-H-5kW-230/48V and is the answer not in the manual?
Questions and answers