Appendix D Display Codes And Abbreviations; Overview; Codes And Abbreviations - Emerson Micro Motion 2400S Configuration And Use Manual

Appendix D
Display Codes and Abbreviations
D.1

Overview

This appendix provides information on the codes and abbreviations used on the transmitter display.
Note: Information in this appendix applies only to transmitters that have a display.
D.2

Codes and abbreviations

Table D-1 lists and defines the codes and abbreviations that are used for display variables (see
Section 8.9.5 for information on configuring display variables).
Table D-2 lists and defines the codes and abbreviations that are used in the off-line menu.
Note: These tables do not list terms that are spelled out completely, or codes that are used to identify
measurement units. For the codes that are used to identify measurement units, see Section 6.3.
Table D-1 Display codes used for display variables
Code or abbreviation
AVE_D
AVE_T
BRD T
CONC
DGAIN
EXT P
EXT T
GSV F
GSV I
LPO_A
LVOLI
LZERO
MASSI
MTR T
NET M
NET V
NETMI
NETVI
PWRIN
Configuration and Use Manual
Definition
Average density
Average temperature
Board temperature
Concentration
Drive gain
External pressure
External temperature
Gas standard volume flow
Gas standard volume flow
inventory
Left pickoff amplitude
Volume inventory
Live zero flow
Mass inventory
Case temperature
Net mass flow rate
Net volume flow rate
Net mass inventory
Net volume inventory
Input voltage
Comment or reference
Enhanced density application only
Enhanced density application only
Enhanced density application only
Enhanced density application only
Refers to power input to the core processor
169