Chapter 4
Connecting Digital I/O Signals
To make digital I/O connections easier, you can use the optional STP37 screw terminal panel
and EP333 cable with your TEMPpoint, VOLTpoint, or MEASURpoint instrument. Connect
the STP37 to the digital I/O connector of the instrument as shown in
Figure 20
each screw terminal.
58
Instrument
(Back Panel)
Digital I/O
Connector
Figure 19: Connecting the Instrument to the STP37
shows the layout of the STP37 screw terminal panel and lists the assignments of
EP333 Cable Assembly
J1
STP37
Figure
19: