Chapter 4
Connecting Digital I/O Signals
To make digital I/O connections easier, you can use the optional STP37 screw terminal panel
and EP333 cable with your TEMPpoint, VOLTpoint, or MEASURpoint instrument. Connect
the STP37 to the digital I/O connector of the instrument as shown in
Connector
Figure 25
each screw terminal.
60
Digital I/O
EP333 Cable
Figure 24: Connecting the Instrument to the STP37
shows the layout of the STP37 screw terminal panel and lists the assignments of
STP37 Screw Terminal Panel
Figure
24: