Logging Data to Disk
To log data to disk, perform the following steps:
1. Ensure that you configured the channels that you want to log to disk (see
2. Start acquisition by clicking the Start/Stop button from the main window or, from the
Acquisition menu, by selecting Start Acquisition.
3. Click the Chart Recorder button on the main window, or from the Windows menu, select
Chart Recorder.
A screen similar to the following appears:
4. Under Channel Visibility, select the channels that you want to be visible on the display.
Note: The first time that you run the Measurement Application, all the channels are
visible.
5. From the Time Axis Length drop-down list, select the time (10 Seconds, 1 Minute, 5
Minutes, 10 Minutes, 30 Minutes, 1 Hour, 2 Hours, 4 Hours) to use for the time axis.
6. If you want to display all the data on a single band, leave the Single Band/Multiple Band
button untouched (the button indicator is green).
If you want to display the data for each channel on a separate band, click the Single
Band/Multiple Band button so that the button indicator turns gray.
Verifying the Operation of Your Instrument
page
68).
71