Table of Contents
Advertisement
Installing the Software
The Measurement Application, developed using Measure Foundry, provides a quick way to
verify that your instrument is working properly. To install the Measurement Application and
all the components necessary to use the Measurement Application with the instrument,
including the IVI-COM driver, perform the following steps:
1. Insert the Instrument OMNI CD into your CD-ROM or DVD drive.
The installation program should start automatically, and the Instrument OMNI installation
program should appear.
2. If the installation program does not start automatically, double-click Setup.exe from the
CD.
The installation program appears.
3. Click Install from Web (recommended) to get the latest version of the software from the
web or Install from CD to install the software from the CD.
4. If you are installing from the web, perform these steps:
a. Click Measurement Instrument Software and follow the prompts to install the
software (including the Measurement Application and IVI-COM driver) and related
documentation.
b. If you wish to install the evaluation version of Measure Foundry, click Measure
Foundry (Evaluation) from the MEASURpoint Installation web site, and follow the
prompts to install the software and related documentation.
Note: To use Measure Foundry with TEMPpoint, VOLTpoint, or MEASURpoint
instruments, select the evaluation version of Measure Foundry Pro + Instruments
Pak.
5. If you are installing from the Instrument OMNI CD, perform these steps:
a. Click Install Measurement Software.
b. Ensure that Measurement (Software & Application) is selected.
c. If you wish to install the evaluation version of Measure Foundry in addition to the
Measurement application, also select Measure Foundry (EVAL).
Note: To use Measure Foundry with TEMPpoint, VOLTpoint, or MEASURpoint
instruments, select the evaluation version of Measure Foundry Pro + Instruments
Pak.
d. Click Install Selected Features and follow the prompts to install the software.
e. When you are finished with the Instrument OMNI CD, click Quit Installer.
For information on using the Measurement Application to verify the operation of your
instrument, refer to
Chapter 5
starting on
page
61.
Preparing to Use the Instrument
27
Advertisement
Table of Contents
