Changing the Configuration of Your Instrument
To change the configuration of your instrument, follow these steps:
1. Stop acquisition by clicking the Start/Stop button from the main window or by clicking
Stop Acquisition from the Acquisition menu.
2. Click the Configuration menu, and then click Change Configuration.
The Change Configuration screen is displayed:
3. Under Unit, select the temperature units in which to display temperature data:
(Celsius),
4. Under Sensor Type, select the input type for each of the channels.
For channels that support programmable voltage ranges, the following drop-down box is
displayed; select the voltage range that you want to uses for the channel:
°
°
F (Fahrenheit), or
K (Kelvin).
Verifying the Operation of Your Instrument
°
C
67