Connecting Voltage Inputs
The way you connect voltage inputs depends on the channel type you are using. This section
describes how to connect voltage inputs to thermocouple input channels, RTD input channels,
and high voltage input channels.
Connecting Voltage Inputs to Thermocouple Channels
Figure 12
shows how to connect a differential voltage input to a thermocouple input channel
on the DT9871U, DT9871, or DT9874 instrument.
Note: On the standard DT9874 instrument, channels 0 to 15 correspond to the thermocouple
input channels.
Analog Input 0
Figure 12: Connecting Voltage Inputs to a Thermocouple Channel
Thermocouple Channel
Ch0
Omega Cu-Cu Plug (SMPW-U-M
Voltage Input
Analog Input 0
Return
–
+
Signal Source
)
Wiring Signals
49