Table of Contents
Advertisement
Chapter 5
5. For each channel, select the digital output line (bit) that you want to turn on when the
6. To see the state of the digital output lines, click the OUT button from main window, or
70
limits for a channel are exceeded. If you do not want to set a digital output line when the
alarm limits are exceeded, choose none.
Note: You can assign the same digital output line to multiple channels. The digital
output line is turned on (1) when any of the alarm limits are exceeded on the channels that
were assigned to that digital output line.
If alarm limits are not exceeded, the digital output line is turned off (0).
from the Windows menu, select Digital Output Panel.
A screen similar to the following appears:
Advertisement
Table of Contents
