Table of Contents
Advertisement
About this Manual
•
•
•
•
•
•
•
•
• An index completes this manual.
Conventions Used in this Manual
The following conventions are used in this manual:
• Notes provide useful information or information that requires special emphasis, cautions
• Items that you select or type are shown in bold.
Related Information
Refer to the following documents for more information on using a TEMPpoint, VOLTpoint, or
MEASURpoint instrument:
• DtxMeasurement IVI-COM Driver online help. For programmers who are developing
• Measure Foundry manual and online help. For programmers who purchase Measure
10
Chapter
3,
"Setting Up and Installing the Instrument,"
the instrument and connect the instrument to the network.
Chapter
4,
"Wiring Signals,"
Chapter
5,
"Verifying the Operation of Your Instrument,"
operation of the instrument using the Measurement Application.
Chapter
6,
"Principles of Operation,"
of the TEMPpoint, VOLTpoint, and MEASURpoint instruments in detail.
Chapter
7,
"Troubleshooting,"
with your instrument, should they occur.
Appendix
A,
"Specifications,"
MEASURpoint instruments.
Appendix
B,
"Connector Pin Assignments,"
I/O connector on the TEMPpoint, VOLTpoint, and MEASURpoint instruments.
Appendix
C,
"About ISO-Channel Technology,"
technology.
provide information to help you avoid losing data or damaging your equipment, and
warnings provide information to help you avoid catastrophic damage to yourself or your
equipment.
their own application programs using a tool other than Measure Foundry, this document
describes how to use the IVI-COM driver to access the capabilities of a TEMPpoint,
VOLTpoint, or MEASURpoint instrument.
The IVI-COM driver works with any development environment that supports COM
programming, including MATLAB® from The MathWorks
or Visual Basic®.NET, Agilent® VEE Pro, National Instruments™ LabVIEW™ or
LabWindows™, and so on.
Foundry to easily create custom applications for a TEMPpoint, VOLTpoint, or
MEASURpoint instrument, these documents describe the functions and capabilities of the
Measure Foundry software.
describes how to wire signals to the instrument.
describes the analog input and digital I/O features
provides information that you can use to resolve problems
lists the specifications of the TEMPpoint, VOLTpoint, and
describes the pin assignments of the digital
describes the benefits of ISO-Channel™
describes how to apply power to
describes how to verify the
TM
, Microsoft® Visual C#®.NET
Advertisement
Table of Contents
