Digit Designation - Mitsubishi Electric MELDAS 60 Series Programming Manual

6.2.5 Digit Designation

A digit may need to be designated for the bit device (X, Y, M, L, SM, F) when using the function
command. How many points of 4-point unit bit devices are to be used with the 16-bit or 32-bit
command is selected with this digit designation.
Use device K when designating the digit. The designation range is as shown below. A random bit
device can be set for the bit device.
(a) 16-bit command: K1 to 4 (4 to 16 points)
(Example) Setting range with digit designation of X0 to F 16-bit data
XF
(b) 32-bit command: K1 to 8 (4 to 32 points)
(Example) Setting range with digit designation of X0 to 1F 32-bit data.
X1F X1C X1B
XC XB X8 X7
K4 designation range
（ 16 points）
X18 X17 X14 X13 X10
K6 designation range
K7 designation range
（28 points）
K8 designation range
（32 points）
X4 X3
K1 designation range
K2 designation range
(8 points）
K3 designation range
（ 12 points）
XF XCXB X8 X7
K3 designation range
（12 points）
K4 designation range
（16 points）
K5 designation range
（20 points）
（24 points）
- 34 -
6. Explanation of Commands
X0
（ 4 points）
X4 X3 X0
K1 designation range
（4 points）
K2 designation range
（8 points）