Mitsubishi Electric MELDAS 60 Series Programming Manual page 74

DEFR ... Pulses in regard to operation results
Bit device
X Y M L SM F
D
DEFR command
(Note) In programming with the MELSEC PLC development tool (GX Developer),
"AND" command is substituted and used.
Function
The operation results are turned ON for one scan when the DEFR command is turned from OFF to
ON, and are turned OFF for all other cases.
X5 M0
Execution conditions
This is executed per scan regardless of the operation results to the DEFR command.
Usable device
Word device
T C D R Z
D
(Note)
M1
X5 OFF
M0 OFF
M1 OFF
- 66 -
Con-
Pointer Level
stant
K H P N
Setting data
Operation memory for
generating one scan worth
D
of pulses
ON
ON
ON
1 scan
1 scan
DEFR
Digit
No. of
desig-
steps Index
nation
1