Mitsubishi Electric MELDAS 60 Series Programming Manual page 226

(4) Tool data
The tool data is tool management data such as the group number, tool number, and tool status.
The details are given below:
Tool data
name
Group number Number to manage tools of the same type
(form and dimensions) in a group.
The tools assigned the same group
number are assumed to be spare tools.
Tool number Number unique to each tool actually
output during tool command execution
Tool data flag Parameter of use data count system,
length compensation system, radius
compensation system, etc.
Tool status The tool state is indicated.
Auxiliary data Reserved data
Tool life data Life time or life count for each tool.
(If 0 is set, infinity is assumed to be
specified.)
Tool use data Use time or use count for each tool.
Tool length Length compensation data set in any
compensation format of compensation number, direct
data offset amount, and addition offset amount.
Tool radius Radius compensation data set in any
compensation format of compensation number, direct
data offset amount, and addition offset amount.
Explanation
- 218 -
9. Exclusive Commands
Data range
1 - 99999999
1 - 99999999
0 - FF (H)
0 - 65535
0 - 4000 (minutes)
0 - 9999 (times)
0 - 4000 (minutes)
0 - 9999 (times)
Compensation numbers 1 - 400
Direct offset amount
Addition offset amount
Compensation numbers 1 - 400
Direct offset amount
Addition offset amount
±99999.999
±99999.999
±99999.999
±99999.999