Table of Contents
Advertisement
(3) Set the standard (fixed) charge
Block units and watt hour meter units standard charge (per month) can be set. However, for standard charge in watt hour meter
units, only the watt hour meter unit charge object (K controller, OA processing unit, etc.) can be set.
[Procedure]
1) Select the Standard Charge button
When the "Standard Charge" button on the Charge Set screen is clicked,
the standard charge set screen opens.
2) Set the standard charge
Set the standard charge in watt hour meter or block units. For watt hour
standard charge, only charge in watt hour meter units is the object.
Standard charge can be input from the keyboard by clicking with the cur-
sor.
Clicking the standard charge allows the value to be input from the key-
boad.
Note:
- When there is no WHM connection the watt-hour standard charge cannot be set.
Ending charge setting
[Procedure]
1) Click the OK or Cancel button
At the end of charge setting, click the OK button.
OK:
Accepts the changes and returns to the air-conditioning charge
screen.
Cancel: Ignore the changes and returns to the air-conditioning charge
screen.
Note:
- When an item which must be set is not set, a caution message is displayed. Reset that item.
5.2.2 Settlement-date designation setting
Set the settlement-date designation day
Since the air-conditioning charge is calculated once a month, set the settlement date.
[Procedure]
1) Select settlement-date designation specification
When the "Settlement-date designation" button at the bottom right-hand
side of the screen is clicked, the Settlement-date designation specification
screen opens.
2) Specify the settlement
To specify the end of month, click End of month. To specify the actual date,
click Manual and select the date by clicking the
(Numerical values can also be input from the keyboard.)
3) Select OK or Cancel
Click OK to end settlement-date designation setting.
OK:
Accepts the changes and completes settlement-date designa-
tion setting.
Cancel: Ignore the changes and completes settlement-date designa-
tion setting.
Note:
- The 29th, 30th, and 31th cannot be set as the settlement-date designation. (However, they can be set as the end of
month.)
/
buttons.
9
Standard charge set screen
Settlement-date designation specification screen
Advertisement
Table of Contents
