Audi Q7 2007 Repair Manual page 47

Fuel injection and ignition
Hide thumbs Also See for Q7 2007:
Table of Contents

Advertisement

♦ Safety Gloves
Fuel Pressure, Checking
Battery voltage at least 12.5 V.
Fuel filter is OK.
Fuel tank minimum
Fuel Pump Control Module - J538- OK
The ignition is off.
WARNING
The fuel system is under pressure! Before opening the system,
place clean rags around the connection. Then release pres‐
sure by carefully loosening the connection.
– Fold the boot -1- to the side and disconnect the fuel line.
– First push the hose coupling -2- downward -arrow A-, then
press the release buttons -arrow B-.
– Remove the hose coupling with the release buttons pressed.
– Connect the Fuel Injection Gauge Kit - Adapter 23 -
VAG1318/23- and Fuel Injection Gauge Kit - Adapter Set -
VAG1318/17A- on the Fuel Injection Gauge Kit - VAG1318- .
– Attach the Fuel Injection Gauge Kit - Adapter Set - Adapter -
VAG1318/17-1A- to the fuel line from the fuel tank.
– Connect the Fuel Injection Gauge Kit - CO Adapter -
VAG1318/11- to the Fuel Injection Gauge Kit - VAG1318- .
– Push an assisting hose -arrow- onto it and hold it into a meas‐
uring container.
1
/ 4 full.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Fuel Injection and Ignition - Edition 02.2015
Audi Q7 2007 ➤
43
3. Injection System

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents