Audi Q7 2007 Repair Manual page 20

Audi Q7 2007 ➤
Fuel Injection and Ignition - Edition 02.2015
❑ Component location. Refer to
⇒ Fig. ""Component Location: Cylinder Bank 1 (right) Heated Oxygen Sensors"" , page 21
❑ Component location: connector. Refer to
⇒ Fig. ""Connectors for the Right Heated Oxygen Sensor in the Engine Compartment"" , page 20
❑ Removing and installing. Refer to
⇒ "3.18 Heated Oxygen Sensors G39 / G108 / G130 / G131 , Removing and Installing", page 53
9 - Secondary Air Injection Sensor 1 - G609-
❑ Component location. Refer to
⇒ Fig. "" Secondary Air Injection Sensor 1 -G609- Component Location"" , page 25
10 - Throttle Valve Control Module - J338-
❑ Component location. Refer to
⇒ Fig. "" Throttle Valve Control Module -J338- Component Location"" , page 22
❑ Removing and installing. Refer to
⇒ "3.9 Throttle Valve Control Module J338 , Removing and Installing", page 34
11 - EVAP Canister Purge Regulator Valve 1 - N80-
12 - Engine Speed Sensor - G28-
❑ Component location. Refer to
⇒ Fig. "" Engine Speed Sensor -G28- Component Location"" , page 25
❑ Removing and installing. Refer to
⇒ "2.6 Engine Speed Sensor G28 , Removing and Installing", page 71
13 - Knock Sensor 1 - G61-
❑ Component location. Refer to
⇒ Fig. ""Component Location Under the Intake Manifold Lower Section, Cylinder Bank 2 (left)"" ,
page 22 .
❑ Component location: connector. Refer to
⇒ Fig. ""Connectors for the Right Heated Oxygen Sensor in the Engine Compartment"" , page 20
❑ Removing and installing. Refer to
⇒ "2.4 Knock Sensor 1 G61 / Knock Sensor 2 G66 , Removing and Installing", page 70
14 - Cylinder Bank 1 Fuel Injectors
❑ Cylinder 1 Fuel Injector - N30-
❑ Cylinder 2 Fuel Injector - N31-
❑ Cylinder 3 Fuel Injector - N32-
❑ Removing and installing. Refer to
15 - Intake Manifold Runner Position Sensor - G336-
❑ Component location. Refer to
⇒ Fig. "" Intake Manifold Runner Position Sensor -G336- Component Location"" , page 22
16 - Camshaft Position Sensor - G40-
❑ Component location. Refer to
⇒ Fig. ""Camshaft Position Sensor and Exhaust Camshaft Control Valve Cylinder Bank 1 (right)"" , page
23 .
❑ Removing and installing. Refer to
⇒ "2.5 Camshaft Position Sensor G40 / Camshaft Position Sensor 2 G163 , Removing and Installing",
page 71 .
17 - Low Fuel Pressure Sensor - G410-
18 - Fuel Metering Valve - N290-
❑ Component location. Refer to
19 - Charge Air Cooling Pump - V188-
❑ Component location. Refer to
⇒ Fig. "" Charge Air Cooling Pump -V188- Component Location"" , page 24
Engine Compartment, Left Side
16
Rep. Gr.24 - Multiport Fuel Injection
⇒ "3.12 Fuel Injectors, Removing and Installing", page 39
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
⇒ Fig. "" Fuel Metering Valve -N290- Component Location"" , page 21
.
.
.
.
.
.
.
.
.
.
.
.