Audi Q7 2007 Repair Manual page 16

Audi Q7 2007 ➤
Fuel Injection and Ignition - Edition 02.2015
– Clamp off the coolant hoses -1- with the Hose Clamps - Up To
25mm - 3094- and remove them from the coolant pipes on the
supercharger by loosening the hose clamps.
– Remove the bolt -2-.
– Disconnect the connector -1- on the Engine Coolant Temper‐
ature Sensor - G62- .
Note
Ignore item -2- and -arrow-.
– Remove the bolt -2- and bracket -3-.
– Move the coolant pipe -1- to the side.
– Remove the bolts -2 and 3- and then remove the Intake Mani‐
fold Runner Position Sensor 2 - G512- .
Note
It is recommended to use a magnate to prevent the bolt from fall‐
ing.
12
Rep. Gr.24 - Multiport Fuel Injection
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.