Certifications - Teledyne T3HVD Manual

Certifications

Teledyne LeCroy certifies compliance to the following standards as of the date of publication. As
standards evolve, these may no longer be current. See the Declaration of Conformity shipped with
your product for current certifications.
EMC Compliance
EC Declaration of Conformity - EMC
The probe meets the intent of EC Directive 2014/30/EU for Electromagnetic Compatibility.
Compliance was demonstrated to the following specifications as listed in the Official Journal of the
European Communities:
EN 61326-1:2013, EMC requirements for electrical equipment for measurement, control,
and laboratory use. 1, 2, 3
1. This product is intended for use in nonresidential areas only. Use in residential areas may cause EM interference.
2. Emissions exceeding the levels required by this standard may occur when product is connected to a test object.
3. To ensure compliance with the applicable EMC standards, use high quality shielded interface cables.
EUROPEAN CONTACT:*
Teledyne GmbH – LeCroy Division
Im Breitspiel 11c
D-69126 Heidelberg
Germany
Tel: (49) 6221 82700
Australia & New Zealand Declaration of Conformity - EMC
The probe complies with the EMC provision of the Radio Communications Act per the following
standards, in accordance with requirements imposed by the Australian Communication and Media
Authority (ACMA):
AS/NZS CISPR 11:2009/A1:2010, EN 55011:2009/A1:2010 Radiated and Conducted Emissions,
Group 1, Class A.
AUSTRALIA / NEW ZEALAND CONTACTS:*
RS Components Pty Ltd.
Suite 326 The Parade West
Kent Town, South Australia 5067
* Visit teledynelecroy.com/support/contact for the latest contact information.
RS Components Ltd.
Unit 30 & 31 Warehouse World
761 Great South Road
Penrose, Auckland, New Zealand
Page 14