Table of Contents
Advertisement
TABLE OF CONTENTS
Pressure drop curve
- H-devices
- H-devices
2
In general, the following recommendations are referred to
Page
in this instruction manual:
2
3
3
4
5
6
7
8
9
10
11
12
13
14
18
22
26
30
31
32
33
34
35
38
39
41/42
- Subject to Technical Modifi cations -
SAFETY REGULATIONS
Safety regulations. Important! Please observe!
Please observe advice referring to function and
operating method!
Reference to instruction manual of the heat pump
controller
The heat pump installation must be installed and
commissioned by a competent person in accordance
with the current legislation and standards and the
instruction manual.
The use of a heat pump plant must be notifi ed to
your local energy supply company.
The heat pump must not be inclined by more than
45° during transportation.
The components and pipework of the refrigeration
circle must on no account be used for lifting
purposes.
For safety reasons, the power supply of the heat
pump and of the controller must never be shut off
even outside the heating period.
Opening of the device only by a competent person.
Before opening the device, all electric circuits must
be switched off.
Works on the refrigeration system must be carried
out only by competent persons.
After purging the evaporator with a chemical purifying
agent, the neutralization of remainders as well as
intense water rinsing is absolutely necessary.
Never treat the device surface with scouring, acidic
or corrosive agents,
830109aGB/151024
- Quick Links:
- Technical Data
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Solterra SWP 230H and is the answer not in the manual?