Svt Operation - Garmin G2000 Pilot's Manual

Flight instruments

SVt operAtion

SVT is activated from the PFD using the softkeys located along the bottom edge of the display. Pressing the
softkeys turns the related function on or off. When SVT is enabled, the pitch scale increments are reduced to
10 degrees up and 7.5 degrees down.
SVT functions are displayed on three levels of softkeys. The PFD Settings Softkey leads into the PFD
function Softkeys, including synthetic vision. Pressing the Attitude Overlays Softkey displays the SVT feature
softkeys. The softkeys are labeled Pathways, Synthetic Terrain, Horizon Heading, and Airport Signs. The
Back Softkey returns to the previous level of softkeys. Synthetic Terrain must be active before any other SVT
feature may be activated. A green annunciator on the softkey label indicates the feature is activated.
Horizon Heading, Airport Signs, and Pathways softkeys are only available when the Synthetic Terrain
Softkey is activated (softkey annunciator is green). After activating the Synthetic Terrain Softkey, the
Horizon Heading, Airport Signs, and Pathways softkeys may be activated in any combination to display
desired features. When system power is cycled, the last selected state (on or off) of the SVT feature softkeys is
remembered.
• Pathways Softkey enables display of rectangular boxes that represent course guidance.
• Synthetic Terrain Softkey enables synthetic terrain depiction.
• Horizon Heading Softkey enables the display of heading marks and digits on the zero pitch line.
• Airport Signs Softkey enables airport signposts.
Activating and deactivating SVT:
1) Press the PFD Settings Softkey.
2) Press the Attitude Overlays Softkey.
3) Press the Synthetic Terrain Softkey. The SVT display will cycle on or off with each press of the Synthetic
Terrain Softkey.
86
This manual downloaded from http://www.manualowl.com
Figure 2-31 Synthetic Vision Imagery
Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A