Garmin G2000 Pilot's Manual page 340

Flight ManageMent
19) After passing OPSHN, the next leg of the arrival turns magenta as shown in Figure 5-198. The magenta arrow
in the flight plan list now indicates the OPSHN to FSHER leg of the arrival procedure is now active.
20) The flight continues through the arrival procedure to FSHER (see Figure 5-199). At a point 31 nm from the
destination airport, the phase of flight scaling for the CDI changes to Terminal Mode and is annunciated by
displaying 'TERM' on the HSI.
After FSHER, you receive a radar vector to the final approach. Annunciations for the upcoming turn and descent,
as well as the VDI and RVSI, appear on the PFD as the flight progresses.
326
This manual downloaded from http://www.manualowl.com
Figure 5-198 Tracking the OPSHN to FSHER Leg
Figure 5-199 Awaiting Vectors to Final
Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A