Garmin G2000 Pilot's Manual page 254

Flight ManageMent
Using Touchscreen Controller
When navigating a direct-to, the system sets a direct great circle course to the selected destination. The course
to a destination can also be manually selected.
Selecting a manual direct-to course:
1) From Home, touch Direct To.
2) Touch the Course Button to display the keypad.
3) Use the keypad to select the course.
4) Touch the Enter Button to accept the course, and and return to the Direct To Screen.
5) Touch the Activate ¯ Button to activate the direct-to using the manually selected course.
Or:
1) On the GDU Controller, press the ¯ Button to display the Direct To Window.
2) Turn the large PFD Knob to move the cursor to the CRS field.
3) Turn the small PFD Knob one click to activate the editing cursor (flashing).
4) Turn the large and small PFD knobs to select the course (large knob moves the cursor; small knob selects the
character)
5) Press the ENT Key or the small PFD Knob to accept the selection and move the cursor to the ACTIVATE? field.
6) Press the ENT Key or the small PFD Knob to activate the direct-to using the manually selected course.
240
This manual downloaded from http://www.manualowl.com
Cancel ¯
Figure 5-80 Cancelling a Direct To
Garmin G2000 Pilot's Guide for the Cessna T240
Using GDU Controller on PFD
190-01263-01 Rev. A