Abnormal Operations - Garmin G2000 Pilot's Manual

Clearing the Stormscope pane removes any previously displayed cell or lightning strike information from the
Navigation Map pane and the PFD Inset Navigation Map.
Clearing Stormscope information on the Navigation Map Pane:
1) From Home, touch Map > Map Settings.
2) If necessary, touch the Sensor Tab.
3) Scroll as needed and touch the Stormscope Lightning Settings Button.
4) Touch the Clear Stormscope Lightning Button.
Selecting a maximum Stormscope map range for the Navigation Map Pane:
1) From Home, touch Map > Map Settings.
2) If necessary, touch the Sensor Tab.
3) Scroll as needed and touch the Stormscope Lightning Settings Button.
4) Touch the Map Settings Button.
5) Touch the Stormscope range button (current range setting displayed in light blue).
6) Scroll as needed and touch to select the maximum map range to display lighting information.

abnorMal oPerationS

If heading input is lost, strikes and/or cells must be cleared manually after the execution of each turn. This
is to ensure that the strike and/or cell positions are depicted accurately in relation to the nose of the aircraft.
Refer to the previous procedures 'Clearing Stormscope information on the Navigation Map Pane' or 'Clearing
Stormscope Information on the Stormscope Pane' to clear Stormscope information from the selected map.
190-01263-01 Rev. A
This manual downloaded from http://www.manualowl.com
Garmin G2000 Pilot's Guide for the Cessna T240
Hazard avoidance
397