Fuel Calculations Screen - Garmin G2000 Pilot's Manual

fUel calcUlationS Screen

Fuel calculations do not use the aircraft fuel quantity indicators and are calculated from the last time
note:
the fuel totalizer quantity was reset.
The system calculates Fuel used (GAL USED), endurance (ENDUR), and range (RANGE NM) based on the
displayed fuel remaining (GAL REM), fuel fl ow, and groundspeed. The fuel remaining can be adjusted on the
Fuel Calc Screen on the Touchscreen Controller.
accessing the Fuel calculations Screen:
Fro m home, touch aircraft Systems > Fuel calc.
adjusting the Totalizer-Based Fuel Remaining:
1) From home, touch aircraft Systems > Fuel calc.
2) Touch the Gal Rem Button.
3) Enter the fuel quantity using the numeric keypad or large and small right knobs, then touch the Enter Button.
The totalizer-based fuel remaining is set to the entered fuel quantity and the GAL USED is set to zero.
Setting the Totalizer-Based Fuel Remaining to Full Fuel:
1) From the home, touch aircraft Systems > Fuel calc.
2) Touch the Set To Full Fuel Button. The totalizer-based fuel remaining is set to the aircraft's usable fuel capacity
and the GAL USED is set to zero.
Remaining
Fuel Used
Calculation
190-01263-01 Rev. A
This manual downloaded from http://www.manualowl.com
Fuel
Edit Remaining Fuel
Quantity
Figure 3-22 Fuel calculations Screen
Garmin G2000 Pilot's Guide for the cessna T240
engine indication SyStem
Set Fuel Quantity to Full
Range
Calculation
Endurance
Calculation
119