APPROACH (APPR)
An Approach Procedure (APPR) can be loaded at any airport that has an approach available. Only one
approach can be loaded at a time in a flight plan. The route for a selected approach is defined by designating
transition waypoints.
Minimums Button
Preview of
Selected Arrival
Loading an approach procedure into a stored flight plan:
1) From Home, touch Flight Plan > Flight Plan Options
2) Touch the Catalog Button to display the Flight Plan Catalog Screen.
3) Touch a flight plan selection button to display the Catalog Options Window.
4) Touch the Edit Button to display the Edit Stored Flight Plan Screen.
5) Touch the Flight Plan Options Button to display the Flight Plan Options Window.
6) Touch the Load Approach Button to display the Approach Selection Screen.
190-01263-01 Rev. A
This manual downloaded from http://www.manualowl.com
Airport Button
Preview Button
Remove Button
Figure 5-110 Approach Selection Screen
Figure 5-111 Approach Pane - Preview of the Selected Approach
Garmin G2000 Pilot's Guide for the Cessna T240
Flight ManageMent
Approach Button
Transition Button
Approach Waypoint Sequence
SBAS Channel Button
Load Button
Load & Activate Button
Destination Runway
261